Since I am the only one complaining about the number of windows, you are probably right about 50 being enough for most applications. I use about 70, have been up to 100 including CAN analysis, suspension monitoring etc. This on a 4 yr old ULV Duo 1.3 GHz laptop. Slowish, but no problems. For a racer...

Just upgraded to Analysis v 8.5.182, and now the layout that I developed and work with does not load anymore, because the SW complains about max number if windows.

Can I increase that number?

Hans

I do not have the problem with the slow update rates, Lambda runs at 10Hz and is just fine. I use 12 of the DTA CAN variables. I use the speed from the DL1, which, as soon as I have a lock on sufficient sattelites is very accurate Have you terminated the CAN bus from DTA on the CAN convertor side wi...

I run roughly the same set-up (S60) The pressure could be a scaling issue. This is the case in my setup, where the CAN unit seems to assume that it is mBar. You could check with the Lite Monitor the output. Divide by 1000 and you are ok In my setup I have had to switch of the Ecu-RPM from CAN and us...

Could anybody send me the default config file (.DH3) from a DASH 3, as described in the manual and provided in the unit?

I want to make some adjustments, and do not have the cable to read back the existing configuration. The one supplied with the RT 7010 version SW is different.

I have recently updated all my FW (DL1, DASH2, Can bus) to the latest versions, in order to get the laptime functionality working. Some Questions: Is there a way to reset the marker information, and the fastest time information? What is the accuracy of the markers in the laps? On average I got a res...

+1
I would like to extend that: Is there a list which firmware version of your different products, Configuration SW and Analysis SW work well together?

e.g. DASH2 buttons with DL1 Mk2, Config V7 with Dash2 V9, CAN with DL1 and Dash2, to name a few?

Thx. Hans

Martin,

can you send me the latest DL1 firmware, both for the Mk1 and MK2 version?
My MK2 is old, Dash2 buttons do not work.
I would also be interested in the lap timing functionality of MK1

Thx, Hans

I am on DL1 mk1 V9-4 firmware (with ecu vars)
Is there a newer FW release that you could send me?