Hi, Ive just added a Oil Pressure sensor to my Link G4+ ECU which is connected to the DL1 MK3 on CAN Bus. ts fine in the ECU and Link have confirmed everything is correct at their end. All other variables via CAN are working (coolant temp, IAT etc), but nothing for Oil Pressure. I havent had to set ...

Hi, Ive just added a Oil Pressure sensor to my Link G4+ ECU which is connected to the DL1 on CAN Bus. All other variables are working, but nothing for Oil Pressure. Its fine in the ECU and Link have confirmed everything is correct. So I'm trying to setup 'CAN data input' in the configuration to see ...

Hi, I have a DL1 and Dash 2 setup which are gathering some data from a Link G4+ ECU. I have a Intake Air Temp (IAT) sensor from the G4+ into the DL1, which is correctly showing on the Dash2. However the DL1 doesn't appear to be logging this, or at least its not in the list of data to view. I'm also ...

Hi,

Having checked the pinouts, there are (very unhelpfully) 2 white wires and 2 red wires.

One of the pins is not connected.


Cheers

Chris

I'll have a look tonight. Cheers

Hi,

Can anyone help with the pin connectors of the inline connector on the Dash 4Pro please.

I need to re-wire it as some wires have been pulled out

Cheers

Chris