Search found 27 matches

by timhoverd
Thu Dec 10, 2020 11:49 pm
Forum: General software support
Topic: Moving between machines
Replies: 1
Views: 10351

Moving between machines

I'm just looking at the V10 software. (Didn't use the logger last year because of SARS-2!) Obviously a lot of the configuration stuff has changed. The thing is, any hints as to what I need to do to move the configuration backwards and forwards between the laptop I take the race circuits and the mach...
by timhoverd
Thu Dec 10, 2020 11:46 pm
Forum: General software support
Topic: Brake flag
Replies: 3
Views: 10798

Re: Brake flag

So sounds like easiest thing to do is take a lead from the brake switch and run it into the data logger? Thanks pete That's certainly what I do on my race car. You could also fit a couple of brake line pressure sensors so that you'd know how hard you were pressing the pedal. I haven't do so because...
by timhoverd
Fri Nov 04, 2016 10:38 am
Forum: General software support
Topic: Configuring wheel speed sensor in analysis software
Replies: 5
Views: 13286

Re: Configuring wheel speed sensor in analysis software

Please could you email a RUN file over to sam@race-technology.com. I'll take a look and see if I can replicate this. Thanks, I've actually done a bit more investigation and got a bit closer to what's going on. In order to check things before I sent you some data I started a blank analysis session, ...
by timhoverd
Thu Nov 03, 2016 12:10 pm
Forum: General software support
Topic: Configuring wheel speed sensor in analysis software
Replies: 5
Views: 13286

Re: Configuring wheel speed sensor in analysis software

Could you please show an image of the equation that has been applied in the wheel pickup section of the vehicle options in the Analysis software. Well, the equation works fine in a user defined variable! All the same, here's another screenshot . There you can see the formula being entered in the ve...
by timhoverd
Fri Oct 28, 2016 5:05 pm
Forum: General software support
Topic: Configuring wheel speed sensor in analysis software
Replies: 5
Views: 13286

Re: Configuring wheel speed sensor in analysis software

Could you please show an image of the equation that has been applied in the wheel pickup section of the vehicle options in the Analysis software. Well, the equation works fine in a user defined variable! All the same, here's another screenshot . There you can see the formula being entered in the ve...
by timhoverd
Thu Oct 27, 2016 1:43 pm
Forum: General software support
Topic: Configuring wheel speed sensor in analysis software
Replies: 5
Views: 13286

Configuring wheel speed sensor in analysis software

For ages I've been meaning to ask this, but as it's the end of the season now's the time to try and understand it! The engine in my car has a perfectly decent speed sensor on the output (it's a motorcycle engine and it's the sensor that Honda use to drive the speedo). I've got this wired into a freq...
by timhoverd
Thu Mar 17, 2016 6:17 pm
Forum: General software support
Topic: 8.5.250 window controls problem
Replies: 8
Views: 20533

Slightly more screen real estate I expect. Over the years RT seem to have moved further away from standard Windows controls, all in the name of more space for the actual analysis windows. An utterly foolish approach in my opinion as it means that there's a myriad small bugs in how the system operat...
by timhoverd
Mon May 18, 2015 10:08 pm
Forum: General support questions
Topic: Command timeout, HELP!!!
Replies: 6
Views: 11320

Jams wrote:I just updated by DASH3 firmware from 1.40.2 to 1.40.9 and it looks to have fixed my problem.


Hmm, interesting. The DL1/Dash4 software on the website is still unchanged...

T
by timhoverd
Sun May 17, 2015 10:52 pm
Forum: General support questions
Topic: Command timeout, HELP!!!
Replies: 6
Views: 11320

Jams wrote:I just posted a similar issue with a DL1 MK3/CLUB and a DASH3.

In your case do you know is it the DL1 firmware or the DASH4 firmware that is going to be updated ?


I believe the former.

T
by timhoverd
Tue May 12, 2015 10:12 pm
Forum: General support questions
Topic: Command timeout, HELP!!!
Replies: 6
Views: 11320

Maxx wrote:Does it still come up with "Request to Start Logging" before the timeout?


Yes.

Turns out that it's a problem with the posted firmware being incompatible. They're apparently sorting it...

T
by timhoverd
Mon May 11, 2015 9:47 pm
Forum: General support questions
Topic: Command timeout, HELP!!!
Replies: 6
Views: 11320

Command timeout, HELP!!!

So, I bought a new DL1 Club and that worked fine with my existing Dash4. I've just updated the Dash4 firmware only to find that the ability to use the Dash buttons to control the logger, e.g. to start logging, no longer works. I get a "Command timeout" message on the dash screen. The logge...
by timhoverd
Sun May 10, 2015 11:20 pm
Forum: General software support
Topic: New Dash 4 software and variable files
Replies: 0
Views: 29743

New Dash 4 software and variable files

The latest version of the Dash 4 config software has lost the ability to load in the variable file as used by the DL1. As a simple example, I have a wideband lambda connected to analogue input 1 of my DL1. My variable file loaded in the analysis software includes the formula I need ("(x*2)+9&qu...
by timhoverd
Mon May 14, 2012 12:08 pm
Forum: General support questions
Topic: Mk1 DL1 and Dash4pro
Replies: 5
Views: 9584

I've got this on email and forum - I'm not sure which you would prefer to work on? I'll go for email!! Yeah, sorry about that. I posted it in both places due to past experience (eg here and here ) of a complete lack of response here. Just for general information: the DASH3's are often locked to a D...
by timhoverd
Mon May 14, 2012 10:34 am
Forum: General support questions
Topic: Mk1 DL1 and Dash4pro
Replies: 5
Views: 9584

Was the dash 4 supplied as part of a package? if so it will only work with the unit it was supplied with. I don't believe it is locked to the supplied DL1. However, the DL1 Mk3 I tried it with was supplied as a package anyway. If nothing else, you'd expect to be told if this was the case... Tim
by timhoverd
Mon May 14, 2012 7:16 am
Forum: General support questions
Topic: Mk1 DL1 and Dash4pro
Replies: 5
Views: 9584

Re: Mk1 DL1 and Dash4pro

However, when the Dash4 is connected the dash powers up, but no serial data is received, according to the serial monitor built into the dash itself. Hmm, seems like the dash (borrowed from a friend who got it from RT direct, not used it so far) is a dud as it doesn't work with a DL1 Mk3 either. Not...

Go to advanced search