Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

VariableDescriptions / ExternalInputs

External Inputs


analog n [V] ( n = 1..32)

Analogue inputs 1 to 32 (normally connected to sensors - as available from Race Technology)

beacon [-]

The optical or magnetic lap beacon input - not normally required

frequency n [Hz] ( n = 1..4 )

Frequency input 1 to 4 (normally a wheel or shaft speed)

Freq n pulse pos [ms] ( n = 1..4 )

The position of the last falling edge of the pulse on frequency n

Freq n low time [ms] ( n = 1..4 )

The time that the input was frequency n was last low for

Freq n high time [ms] ( n = 1..4 )

The time that the input was frequency n was last high for

Pulse n [-] ( n = 1..4 )

This is the number of pulses in frequency input n

serial bytes

Number of bytes from the serial port

RPM [rpm]

The engine rotational speed

 

Page last modified on December 03, 2014, at 12:46 PM