Reading Configuration from DASH4PRO
Note: You will require a special connector to connect the DASH4PRO to the PC (not shipped with the DASH4PRO). For more information please contact Race Technology.
To transfer the configuration from the DASH4PRO unit and load it to the software, you must first connect the device to computer through the COM port. Make sure to switch off the device whilst connecting.
Once the device is connected, turn on the device.
select the Read Configuration from DASH4PRO option from the Menubar or the Toolbar. The following window will then appear:
Select the connected port, press the Get File button to transfer the control to the device.