Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

Operation / WarningAndSectorDisplayTimes

Setting warning and sector display times

The duration for which warning messages and sector times are displayed on the screen can also be configured from the DASH2 menu system. Enter menu display mode and use the UP/DOWN buttons to display “Warning times”, in the main menu and press SELECT. Then use the UP/DOWN buttons to select the desired warning duration, press SELECT to save the new setting, then use the UP/DOWN buttons to set the duration of the sector time display and press SELECT again to save this setting and return to normal display mode. The red shift lights on the right will flash when the warnings are displayed.

Page last modified on August 03, 2009, at 02:49 PM