Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

LapTiming / SettingUpTheDisplayForLapTiming

Setting up the Display for lap timing

You can access this screen configuration from the DASH2 menu system, as shown in figure 4 and use the SELECT/UP/DOWN buttons to change the setting. In the LAP TIMES menu this is SET UP DISPLAY When selected you will see LAP TIME OFF and EDIT (shown in the text for the right hand window), pressing the UP and DOWN buttons will cycle through OFF, LEFT, MID and RIGHT. This allows you to set the position for this value being shown on the display.

When SELECT is pressed it will move on to the next option until all four have been set. The values which can be set are:

LAP TIME Time this far in the current lap (or predicted lap time)
LAP DIFF Difference to time at this point in best lap
SEC TIME Time for the last sector
SEV DIFF Difference between last sector and best sector

Again by pressing the UP and DOWN buttons will cycle through OFF, LEFT, MID and RIGHT for all the display options. So you can set the position for all the values you want being shown on the display, in the position you want them. After you have pressed SELECT on the last value the DASH2 will return to your normal first display screen.

Page last modified on March 04, 2010, at 03:08 PM