Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website


DTA S40 S60 S80

ECU configuration

The datastream for the ECU needs to be enabled, this is in the DTASwin software, in the Other Map Settings / Data Stream menu.








Channel Listing:

ECU Name Race Technology message Race Technology Default name Race Technology VAR number Resolution
RPM Engine RPM RPM VAR_0010 1 RPM
TPS% aux 1 Throttle position VAR_2000 1%
Water temp temperature 8 Water temp VAR_1007 1oC
Air temp temperature 1 temperature 1 VAR_1000 1oC
MAP pressure 5 Boost pressure VAR_3504 0.1 kPa
Lambda misc 1 Lambda 1 VAR_4000 0.001 lambda
Vehicle speed misc 4 Speed from the ECU VAR_4003 1 MPH
Oil pressure pressure 2 Oil pressure VAR_3501 0.1 kPa
Fuel pressure pressure 3 Fuel pressure VAR_3502 0.1 kPa
Oil temp temperature 9 Oil temp VAR_1008 1oC
Battery volts misc 3 Battery voltage VAR_4002 0.1V
Ignition angle angle 2 Ignition angle VAR_3001 0.1o
Injection time measured time 1 Fuel inj 1 PW on VAR_2500 0.01s
Fuel con aux 26 Auxiliary 1 VAR_2025 0.1 L/100Km
Page last modified on February 24, 2014, at 01:47 PM