Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

ECUType / AutronicSM3V109AndSM4V109

Autronic SM3 v1.09 and SM4 v1.09

The Autronic SM3 with firmware version 1.09 and the Autronic SM4 with firmware version v1.09 streams data out automatically at a rate of 19200baud. The following channels of data are available.

ECU Name Race Technology message Race Technology Default name Race Technology VAR number Resolution
RPM Engine RPM RPM VAR_0010 25 RPM
Coolant temp temperature 8 Water temp VAR_1007 0.1 oC
Charge temp temperature 2 Inlet pre turbo 1 VAR_1001 0.1 oC
Intake air temp temperature 1 temperature 1 VAR_1000 0.1 oC
Manifold pressure pressure 5 Boost pressure VAR_3504 1 mBar
AF ratio misc 1 Lambda 1 VAR_4000 0.01 lambda
Injection time aux 6 Fuel inj 1 PW VAR_2005 1 ms
Ignition angle angle 2 Ignition angle VAR_3001 0.1o
Battery voltage misc 3 Battery voltage VAR_4002 0.01 V
Throttle position aux 1 Throttle position VAR_2000 0.1%
User selectable data 1 temperature 17 Exhaust 1 temp VAR_1016 0.1 oC
User selectable data 2 temperature 18 Exhaust 2 temp VAR_1017 0.1 oC
User selectable data 3 temperature 19 Exhaust 3 temp VAR_1018 0.1 oC
User selectable data 4 temperature 20 Exhaust 4 temp VAR_1019 0.1 oC

Please note that the op data stream must be enabled on the ECU as shown in the screenshot below:

Note - Not all channels listed in the table(s) above may be available from your ECU. This can be dependent on the vehicle model & year of manufacture.

Page last modified on May 13, 2019, at 07:29 PM