Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

DASH2PROStatus-Warning-ErrorMessages / OtherErrors-Warnings

3. Other Errors / Warnings

INVALID CALIB

Appears at start up when calibration data are invalid and the device needs to be recalibrated.

INVALID CONFIG

Appears at start up when configuration data are invalid and the device needs to be reconfigured.

MEM ERROR

Appears when the SPI flash chip is failed to read. This error shows permanently.

GPS ERROR

Appears at start up when the internal GPS module has failed to initialise.

REPLAY STARTED

Appears when playback mode is started.

REPLAY STOPPED

Appears when the playback mode is stopped.

LOGGING STARTED

Appears when logging started.

LOGGING STOPPED

Appears when logging stopped.

VEHICLE MOVING

Appears if tries to enter to DASH2 PRO menu while the vehicle is moving (over 2 Mph).

MAX MIN RESET

Minimum and maximum values are reset successfully.

INVALID LOGGER

DASH 2 PRO is locked to a specific logger and it is connected to a different logger.

DEMO ONLY - NOT FOR SALE

Appears on special DASH2 PROs given for demonstration purposes.

DISCONNECT USB - AND RESTART

Appears if logger license in enabled and the internal memory card has failed to initialise.

ALARM CANCELLED

Appears if the alarm is cancelled after triggering more than the number of times set in the configuration or alarm is cancelled with a long button press.

LOW FUEL

Appears based on the low fuel warning in the configuration software.

ENGINE TIMER 1

Appears if Engine Timer 1 has triggered.

ENGINE TIMER 2

Appears if Engine Timer 2 has triggered.

Page last modified on October 06, 2015, at 11:57 AM