Frequently asked questions
How does the lap and sector timing work without a beacon?
Because the system uses the GPS data the system knows itís position on the track, to mark the point as a lap or sector you simply press a button on the DL2/DL1/AX22. The DL2/DL1/AX22 then calculates the lap and sector times every time you subsequently pass that point on the track and transmits them to the dashboard for display.
If the GPS data is 5Hz, does this mean the times have a resolution of 0.2 seconds?
No, the system calculates the position very accurately and the lap times have a resolution of 0.01 seconds. Sector times are generally far more accurate than a traditional lap beacon system.
Can I directly compare the lap sector times from the display and the analysis software?
Yes, the track markers can be imported and exported from the analysis software.
Does the dashboard work with the DL90?
No, there is no serial output from the DL90 for the DASH1 to use
Can the DASH1 be used on itís own?
No, itís designed to read a serial stream and doesnít have any other inputs.