A very high quality thermocouple amplifier designed and built by us specifically for auto sport applications. The amplifier comes in 2 temperature ranges and is suitable for many applications including exhaust gas temperature measurement. It requires a 5V supply (obtained directly from the DL1 or DL2). There is a standard miniature k-type thermocouple connector one end, and a flying lead to connect directly to the logger on the other end. There are two versions of the amplifier available, for either -100°C to 210°C or -100°C to 1150°C (for exhaust temperature measurements). The output voltage is 0-5V in either case. Typical accuracy is 2°C +/-1% of reading.
|Supply voltage||5V +/-5%|
|Current consumption||5 mA|
|Operating temperature range||0-70°C|
|Typical accuracy||±1% of reading +2°C|
|Temperature range||-100 - 1150°C (4mV/°C, 0.4V @ 0°C)
-100 - 210°C (16mV/°C, 1.6V @ 0°C)
|Input connector||Miniature k-type|
|Output connector||Wire ended flying lead|
|Output cable length||2m (other lengths available on request)|
For further information on thermocouples and their calibration please visit our Knowledge Base here
† - note that the price is set in GBP, the exact amount charged to your card may vary according to your banks exchange rate.
* - Main product required.c
There are no products selected to add to the basket. Please select a product by ticking the relevant box.