Race Technology Industrial OEM testing products are currently in use within, but not limited to the following applications. Our OEM testing products offer exceptional measurement accuracies, competitive prices and are optimised for transport/vehicle testing. If you have an application not detailed below and would like to discuss the suitability please contact us at email@example.com
Application documents are available to download below, detailing system examples for different testing scenarios.
ADAS End-of-line and AEB Testing
Application note illustrating an example ADAS testing system, a typical testing procedure and the benefits of the system. A video demonstration is shown in the video below:
Brake Testing System
An example brake testing system, looking at repeated braking tests and accelerations causing increased brake disc temperatures. With braking measurements being taken by the SPEEDBOX INS system, and additional sensor inputs reading disc temperatures and brake line pressures. Additional vehicle data obtained via connection to the vehicle CAN bus, eg. wheel speeds, RPM, throttle position etc.
R41 Drive-by Noise Testing System
An example system for (Pass-by) drive-by noise testing of OEM vehicles. The application notes detail an example scenario for motorcycle testing. With the benefits of the Race Technology system being quick setup and instant driver/rider feedback.
This application note describes a method for comparing distance measurements from a CATS or SPEEDBOX-INS system with DASH4PRO, to those from a class 1 tape measure. This would be done to verify the measurements.
A demonstration of Race Technology's low speed GPS accuracy is show below. Using the SPEEDBOX-INS and SPEEDBOX-INS + GPS2 RTK:
A video example of the SPEEDBOX Distance Verification is shown below:
OEM Vehicle Testing - Development and testing of new vehicles and components