1k Run files

drf99
Posts: 10
Joined: Wed Jan 26, 2011 6:39 pm

1k Run files

Postby drf99 » Fri May 13, 2011 3:11 pm

Brand new DL1 & Dash3lite combo. I think things are configured ok, but got a card full of 99 1k run files first time out on the track.
I *told* the driver to do a couple laps in his Prius...

I think I saw a note about this error sometime, that it was a common error, but for the life of me, in the pressure at the Track, I can't find it.

Thanks,
Dave F.

924RACR
Posts: 113
Joined: Tue Jul 13, 2010 5:34 pm
Location: Royal Oak, MI
Contact:

Postby 924RACR » Fri May 13, 2011 4:22 pm

Any chance you had autologging turned on?

drf99
Posts: 10
Joined: Wed Jan 26, 2011 6:39 pm

Postby drf99 » Fri May 13, 2011 5:52 pm

Yes, I had 500 start and 400 stop 1/10 km/hr of course.
Found what might be a poor antenna connection & snugged up.

Dave F.

924RACR
Posts: 113
Joined: Tue Jul 13, 2010 5:34 pm
Location: Royal Oak, MI
Contact:

Postby 924RACR » Mon May 16, 2011 12:17 pm

We found similar results when we didn't have the autolog settings correct.

I don't remember what the correct desired config would be, other than it seemed backwards to me. I bailed on the autolog after a few failures and switched back to manual use of a button. I found it too high of a risk of not getting data to keep messing with autologging.


Return to “Installation questions”

Who is online

Users browsing this forum: No registered users and 23 guests