juancas wrote:Hi,
I have a 20 hz DL2. When I installed the V.6 of the Analysis Software I had to change the code.bin file just to use the post-processed 20Hz-data in the GPS options. Now, with V.7 I don´t have this option and I don´t know if I have to change the codes file or not. How can I know if the software is using the 20 hz capability? Do I have to change the processserialdata.dll to get the data from the IMU? Can anyone help me?
thank you
DL2 20 hz software
DL2 20 hz software
Re 20Hz: The new software should already know that your serial # is 20Hz enabled. To test this, set Data > Analysis Options > GPS Options to "Use raw GPS data" and "Use post processed 20Hz data". Process some data, it will object if not enabled.
Re the IMU, I see variables available under Data > Variable Manager > Serial Variables that look like the IMU channels - try processing some IMU data with those enabled and see if that is the case.
Re the IMU, I see variables available under Data > Variable Manager > Serial Variables that look like the IMU channels - try processing some IMU data with those enabled and see if that is the case.
Al Seim
Race Technology USA
Race Technology USA
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 80 guests