USB connection problems to dash 2 pro
-
- Posts: 9
- Joined: Sat Oct 21, 2017 6:08 pm
USB connection problems to dash 2 pro
Hi, i cant get connected to my dash 2 pro over USB. When can i find a windows 7 driver for it? Windows says device unrecognized? Thanks des
Re: USB connection problems to dash 2 pro
All the drivers are included in our software, so assuming that is installed then it should just work... no other 3rd party drivers are needed.
Support (A)
Support (A)
-
- Posts: 9
- Joined: Sat Oct 21, 2017 6:08 pm
Re: USB connection problems to dash 2 pro
Ok thank you. I have tried 2 laptops and I get the same problem. I also have problems getting my ECU vems to communicate with the dash 2 pro. Could it be a fault in the unit. Can I send it back for testing?
Re: USB connection problems to dash 2 pro
The USB is usually very reliable so I suspect a connection problem.
I recommend checking the connector pins on the back of the DASH for any small pieces of metal or carbon fibre or even bent pins.
If all looks OK then sounds best to send back for checking...
Please email service @ race - technology . com to request an RMA.
Kind regards,
(K)
I recommend checking the connector pins on the back of the DASH for any small pieces of metal or carbon fibre or even bent pins.
If all looks OK then sounds best to send back for checking...
Please email service @ race - technology . com to request an RMA.
Kind regards,
(K)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
-
- Posts: 9
- Joined: Sat Oct 21, 2017 6:08 pm
Re: USB connection problems to dash 2 pro
Thanks for the advice. I found a tiny strand of copper in the connector. Now I'm running great! Thanks
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 11 guests