Im trying to understand the technology software for now i got it working but the brake and tps are both below/above each other.
I want to combine those 2 inside "1' . Not just 1 line but on top of each other.
How do i do that?
Put 2 sensor data into 1 overview
Support
Hello,
OK you want to measure the time between coming off the throttle and braking.
Picture below shows pedal position and pbrakeFR front right brake pressure
One way would be to just select time to be displayed and move the curser between the point of coming off the pedal and the brake pressure going up. This is simple and may produce results that are not comparable.
I would create a user defined equation that creates a pulse of the time you want to measure. Something like...
when throttle and brake pressure are both low and the cornering g-force is low then output 1 otherwise output -1
In this case it is written like this...
if(VAR_2000+VAR_2007<20 and (ABS(VAR_0004))<0.5,1,-1)
VAR_2000= throttle
VAR_2002 = brake pressure
VAR_0004 = cornering force
This then produces a pulse like this...
You can then select summary statistics to display time positive of your user defined channel which will dynamically change as you click on the sectors giving you instantaneous results.
This example shows the blue sector was doing nothing for 0.05s longer then the red sector
Kind regards,
Support (K)
OK you want to measure the time between coming off the throttle and braking.
Picture below shows pedal position and pbrakeFR front right brake pressure
One way would be to just select time to be displayed and move the curser between the point of coming off the pedal and the brake pressure going up. This is simple and may produce results that are not comparable.
I would create a user defined equation that creates a pulse of the time you want to measure. Something like...
when throttle and brake pressure are both low and the cornering g-force is low then output 1 otherwise output -1
In this case it is written like this...
if(VAR_2000+VAR_2007<20 and (ABS(VAR_0004))<0.5,1,-1)
VAR_2000= throttle
VAR_2002 = brake pressure
VAR_0004 = cornering force
This then produces a pulse like this...
You can then select summary statistics to display time positive of your user defined channel which will dynamically change as you click on the sectors giving you instantaneous results.
This example shows the blue sector was doing nothing for 0.05s longer then the red sector
Kind regards,
Support (K)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Re: Support
Support wrote:
Like this?
Under options just select to group graphs by variable.
Kind regards,
K
Sweet! Just what i was looking for.
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 11 guests