Serial data format needed URGENTLY

schoday
Posts: 8
Joined: Mon Mar 12, 2007 5:39 pm

Serial data format needed URGENTLY

Postby schoday » Mon Mar 12, 2007 5:51 pm

Hi everyone,

We need the PDF doc that describes the serial data format of the DL2's
serial data output (RS-232). This doc is not accessible from the website.

Please email it to : schoday@iit.edu

Please include the VB example too if you can.


Thank you

RTUSA
Site Admin
Posts: 457
Joined: Fri Feb 24, 2006 7:34 pm
Location: Richmond, VA, USA

Postby RTUSA » Tue Mar 13, 2007 1:13 pm

Serial data info sent.
Al Seim
Race Technology USA

jaym5
Posts: 1
Joined: Wed Apr 18, 2007 10:31 am

Postby jaym5 » Thu Apr 19, 2007 2:08 pm

Can you sent me the PDF and the VB example too?

Please email it to : jaym5@gmx.de

Best Regards

RTUSA
Site Admin
Posts: 457
Joined: Fri Feb 24, 2006 7:34 pm
Location: Richmond, VA, USA

Postby RTUSA » Thu Apr 19, 2007 2:58 pm

Email sent.... :wink:
Al Seim
Race Technology USA

jalai
Posts: 2
Joined: Fri Apr 07, 2006 8:59 am

Postby jalai » Fri Apr 20, 2007 8:54 am

I'm interested to use serial output too.
And how can I use serial INPUT? Is there some document for this?
(I try logging data from EFI EURO6 box serial output)

Any serial data info is greatly pleasing.

Best Regards:
Jari Laine
jalai(at)luukku(dot)com

Edit. I have DL1.

jalai
Posts: 2
Joined: Fri Apr 07, 2006 8:59 am

Postby jalai » Wed May 09, 2007 8:11 am

Can somebody sent documents for serial port use? (input and output)

Thanks:
Jari Laine
jalai(at)luukku(dot)com

PS. Sorry my terrible language.

RTUSA
Site Admin
Posts: 457
Joined: Fri Feb 24, 2006 7:34 pm
Location: Richmond, VA, USA

Postby RTUSA » Wed May 09, 2007 12:47 pm

Info sent....
Al Seim
Race Technology USA

Iellow
Posts: 7
Joined: Mon Apr 23, 2007 8:52 am
Location: Spain

Postby Iellow » Thu May 10, 2007 11:44 am

Can I have a copy of those documents for the serial port? Mail the to me at barrosorojas(at)gmail(dot)com

Thank you!!

PatGT
Posts: 3
Joined: Tue Dec 25, 2007 3:28 pm

Postby PatGT » Wed Jan 02, 2008 1:38 pm

Can you sent me the Serial Data PDF and the VB example too, and whatever little proggies there are to parse my data.

Thank you in advance, your product is awesome.

APS

timhoverd
Posts: 42
Joined: Fri Mar 24, 2006 11:04 pm

Postby timhoverd » Thu Jan 03, 2008 6:02 pm

I'd really like a copy of the latest serial data format document too. Please send to tim(at)hoverd.org.

Thanks,

Tim

lsdweb
Posts: 14
Joined: Mon Jul 09, 2007 6:12 pm

Postby lsdweb » Thu Jan 17, 2008 5:17 pm

Me too please

wyn(at)tybrynbedw.orangehome(dot)co(dot)uk

Thanks in advance

Polux RSV
Posts: 5
Joined: Tue Jan 08, 2008 12:48 pm
Location: Gland, CH

Postby Polux RSV » Fri Jan 18, 2008 9:18 am

[Mode admin ON] :mrgreen: :mrgreen: :mrgreen:

The serial data format is explained in the knowledge base pages, under software,main analysis software, technical,serial data format and the different subpages.
Exept the Channel 3 (raw GPS data), everything is explained in details. File format is the same, there is only 8 bytes at the beginning wich I don't have the definition.

[Mode admin OFF] :mrgreen: :mrgreen: :mrgreen:

Angelo

ECOELEC
Posts: 49
Joined: Sat Nov 29, 2008 10:33 pm
Location: Brussel
Contact:

GPS raw decode pdf

Postby ECOELEC » Tue May 27, 2014 2:39 pm

Hello,

I want to test the dl1 as an standard serial GPS receiver and decode it into an FPGA board. Is it possible without decoding all the RT frames?

I'm also interested in the GPS format PDF file if possible.

Best regards.

Jean-Michel

Turby
Posts: 296
Joined: Thu Nov 17, 2005 2:28 pm

Postby Turby » Wed May 28, 2014 12:38 pm

You will have to decode all the RT Frames to extract the one(s) you are after. You will also have to enable the transmission of Raw GPS as well. I guess you are expecting to decode the raw NMEA sentences on your FPGA board ?

ECOELEC
Posts: 49
Joined: Sat Nov 29, 2008 10:33 pm
Location: Brussel
Contact:

Postby ECOELEC » Fri May 30, 2014 8:08 pm

Hello,

Yes, i need to decode these sentences but, for now, i can't decode the RT frames on my FPGA it's why i asked this.

As i understand, i must first decode them but, will have access to native NMEA sentences in the RT frames if i check to send RAW GPS over RS232?

Regards


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 9 guests