Page 1 of 1

Battery light staying on

Posted: Mon Jul 06, 2020 9:07 am
by Samueljon
Hi,

Recently installed my dash 2 into my 200sx, the standard set up has 1 wire coming from the alternator to the dash, I’ve tried to have a search but couldn’t find a proper answer.

Does the dash2 need a resistor from the alternator before the dash? If so I don’t suppose anybody knows what size?

Thanks
Sam

Re: Battery light staying on

Posted: Mon Jul 06, 2020 12:49 pm
by Support
Hello Samueljon - No, the DASH2 already has a resistor built in. You need to do is connect the field/alternator warning terminal on the alternator, to the green/red wire on Connector A of the dash wiring harness. More information on wiring the dash into the vehicle can be located here:

https://www.race-technology.com/wiki/in ... ingHarness

Best regards,
Dan

Re: Battery light staying on

Posted: Mon Jul 06, 2020 2:06 pm
by Samueljon
Afternoon dan,

Yeah it’s all wired up correctly but the charge light stays alight even while the car is running.

It’s the same issue this guy was having in the link below -

viewtopic.php?t=2848