DL1 Pro not recording frequency

jeffnickel
Posts: 8
Joined: Fri Nov 06, 2015 6:01 pm
Location: Vancouver Canada

DL1 Pro not recording frequency

Postby jeffnickel » Wed Apr 12, 2017 5:23 pm

I am trying to setup my DL1 to record a wheel sensor on FREQ1 input. I have it on my bench with a 75Hz square wave input with 12V amplitude to Pin "T" of the 19 pin connector. I get no frequency data in the file. Also, the first three analog inputs do collect but only at 100Hx NOT at 1KHz as configured. Any ideas what might be wrong?

I have tried to attached my config file, DL1.CMG, but I get a error message saying my file has an incorrect extension??? Tried removing the extension but no luck???

Thanks,
Jeff (Newbie)

jeffnickel
Posts: 8
Joined: Fri Nov 06, 2015 6:01 pm
Location: Vancouver Canada

Solved: DL1 Pro not recording frequency

Postby jeffnickel » Wed Apr 12, 2017 7:05 pm

After reformatting the SD card twice and loading config file the DL1 logged the data correctly.
Thanks,
Jeff


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 7 guests