Page 1 of 1

MBE 9A4 to Dash2pro CAN profile

Posted: Mon Oct 08, 2018 10:01 am
by alienvisitor
Hi,

Looked everywhere in the KB, software etc and can't find any repositories of CAN profiles. Was hoping to find a file in the software that I could work from.

Looking for a CAN profile to receive the MBE 9A4 data stream setup as per the link

https://www.race-technology.com/wiki/in ... dMBE992CAN

Many thanks in advance.

Re: MBE 9A4 to Dash2pro CAN profile

Posted: Mon Oct 08, 2018 12:10 pm
by Support
Hello,

When a customer purchases a CAN receive license for a DASH2PRO, we send them a .CAN file & installation instructions via email. The .CAN file includes all of the CAN information the customer requires i.e. CAN IDs, CAN ID length, CAN baud rate, byte ordering, scale, offset etc. The customer then simply follows the installation instructions to load the .CAN file into the DASH2PRO configuration.

Support(D)