Dash 2 pro Honda Civic type r ep3

Colly
Posts: 4
Joined: Mon Jul 18, 2016 10:31 pm

Dash 2 pro Honda Civic type r ep3

Postby Colly » Sat Sep 03, 2016 6:42 pm

Hi
I've just had dash2 pro fitted to my ep3 I have a couple of teething problems

The rev counter appears to be about 1k rpm out on idle? How do I fix this?

As the car has a static limiter sometimes I'm having issues with it kicking in sometimes as the dash is running of gps can I switch this to the ecu pickup

The gear indicator I have tried to set it by the gear ratios but they don't seem to be working

Support (D)
Posts: 74
Joined: Mon Aug 17, 2015 9:36 am

Re: Dash 2 pro Honda Civic type r ep3

Postby Support (D) » Thu Sep 08, 2016 8:37 am

Hello,

To fix the rev counter you need to adjust the pulses per revolution, this can be found in the wheel speed and RPM section of the configuration software.

As for the static limiter and gear indicator, can you send me the configuration file installed on the dash currently? I'll inspect the config file and we'll take it from there.

Kind regards,
Support(D)

Support (D)
Posts: 74
Joined: Mon Aug 17, 2015 9:36 am

Re: Dash 2 pro Honda Civic type r ep3

Postby Support (D) » Thu Sep 08, 2016 8:38 am


Colly
Posts: 4
Joined: Mon Jul 18, 2016 10:31 pm

Re: Dash 2 pro Honda Civic type r ep3

Postby Colly » Mon Sep 12, 2016 10:17 pm

Thanks Daniel I will send the file tomorrow I've just seen this.

I did change the pulses but I seemed to knock the speedo of then?

Itzluke2795
Posts: 2
Joined: Sun Mar 17, 2019 8:47 pm

Re: Dash 2 pro Honda Civic type r ep3

Postby Itzluke2795 » Mon Mar 18, 2019 10:32 am

Hi colly any chance I could have a copy of your config to use as a base for my ep3 type r? Many thanks


Return to “Installation problems”

Who is online

Users browsing this forum: No registered users and 1 guest