LCD Screen gone blank on DASH2 PRO

TheChief
Posts: 1
Joined: Wed Mar 30, 2016 5:49 pm

LCD Screen gone blank on DASH2 PRO

Postby TheChief » Sun Apr 03, 2016 1:18 pm

Hello everyone -

New to the board and to RT in general. My Dash2 PRO LCD display has suddenly gone blank. Traced the various cables and all seems to be feeding power. The blue (hi beam) light at the bottom of display comes on when required further confirming that the display is indeed getting power. But the previously working shift lights are no longer coming on. I read posts around loosing half the display but can't seem to find anyone who experienced this. Would anyone have any last resort procedure that I can try before scrapping it altogether? Really appreciate the help!

C.

monirh69
Posts: 2
Joined: Mon Apr 11, 2016 10:22 am
Location: Dhaka, Bangladesh
Contact:

Re: LCD Screen gone blank on DASH2 PRO

Postby monirh69 » Sat Apr 16, 2016 4:45 am

Switch of the LCD the, Unplugged power cable and VGA. Wait for 5 minute and Plug then Power the LCD. Hope your Problem should be solved... :)
Monirh
myweb


Return to “Installation problems”

Who is online

Users browsing this forum: No registered users and 1 guest