Page 1 of 1

RPM on DASH4PRO is half of the value on LiteMonitor

Posted: Sat Jan 24, 2015 5:56 pm
by PRORACING
DASH4PRO with DL1PRO and CAN interface. RPM from CAN exactly visible in LiteMonitor. But on the DASH4PRO is only half of the right value. Low and Hi external inputs disabled. RPM only from CAN.

Posted: Thu Jan 29, 2015 8:48 am
by Support
Hi There,

I believe the issue will be lying within the pulses per revolution setting in the DASH4 PRO configuration you have created. When connecting to and using ECU RPM via an interface this should be set to one pulse.

To change this go to Configuration > RPM and change the value to 1.

Send the configuration to the unit and this should solve the issue.

If you are still seeing the issue after going through the above steps, please feel free to email me directly and I shall do my best to help.

sam@race-technology.com

Kind Regards,
Support (SK)

Posted: Mon Feb 16, 2015 2:21 pm
by PRORACING
Thanks, Sam, it solved the problem.