Page 1 of 1
Dash2 shift light not working
Posted: Tue Jul 10, 2012 7:54 pm
by Capposteve
Hey. Just received my brand new dash 2 and whilst setting up shift light brightness I noticed the far left led does not light up. Is this normal during the brightness setup??
Steve
Posted: Thu Jul 12, 2012 4:53 pm
by osborni
That could be set as the logging indicator. Check that in the dash menu system.
Posted: Thu Jul 12, 2012 4:59 pm
by Capposteve
Hi. Thanks. Where in the menu can u sellect the led used?? I notice. The far right two res LEDs light when in alarm but thats about it
Posted: Thu Jul 12, 2012 7:27 pm
by osborni
You'll need to hook up the four buttons. Power up the unit and push the "menu" button. Scroll around until you find it.
Menu structure:
http://www.race-technology.com/wiki/ind ... uStructure
Find "Logging Status" / "Status display" (same thing IIRC)
Logging status:
http://www.race-technology.com/wiki/ind ... tusDisplay
Personally, I use the little check mark on the top right of the display to confirm the lights on my DL1.
Posted: Thu Jul 12, 2012 7:43 pm
by Capposteve
Thanks very much for clearing that up. I have the status turned on but don't need it on as I have no dl1. Cheers.
View the latest post
Posted: Wed Apr 20, 2016 6:08 pm
by saggotXL
Find this folder "AGeeksToy" and delete it. you will loose your settings, but its better than not being able to use the toy