EFI euro 6 to can and DASH2

lqm
Posts: 3
Joined: Thu Feb 25, 2010 1:20 pm
Contact:

EFI euro 6 to can and DASH2

Postby lqm » Fri Feb 26, 2010 3:11 pm

Hey is there to help me with that code CAN adapter
I have an EFI Euro 6 on my Peugeot 308 rally car.
and a Dash2. but I can not get it to come up Dash2.
it will say something that it is not true at Dash2.
I have tags from the EFI but can not figure out what should be in Can adapter ..
I have seen all the EFI.
Rpm
water temp
oil pressure
oil temp
fuel pressure
fuel temp
TPS
Map
Air temp

but I can not figure out what should be in Can Adapter
is there anyone who can help with the

Regards
Denmark
/ Glen S
http://www.seidler-motorsport.dk/

lqm
Posts: 3
Joined: Thu Feb 25, 2010 1:20 pm
Contact:

Postby lqm » Fri Feb 26, 2010 3:15 pm

this is what I'm here for EFI by



From firmware version 459
Euro-6 & Euro-12 CAN data export, setting 2 - Extended:

Name Length Position Type Scaling Freq ID hex EFI Tab Pos
RPM word Byte0=MSB, Byte1=LSB 1 Rpm/bit 100 300 35
TPS1 byte Byte2 0bit=0% ..256bit=100% 100 300 60
TPS2 byte Byte3 0bit=0% ..256bit=100% 100 300 81
MAP word Byte4=MSB, Byte5=LSB 1 mbar/bit 100 300 51
MAP2 word Byte6=MSB, Byte7=LSB 1 mbar/bit 100 300 59
DFARF word Byte0=MSB, Byte1=LSB 2nd complement bits 100 301 26
DMAP word Byte2=MSB, Byte3=LSB 2nd complement bits 100 301 27
AE word Byte4=MSB, Byte5=LSB 1us/bit 100 301 217
DE word Byte6=MSB, Byte7=LSB 1us/bit 100 301 218
VhSpeed word Byte0=MSB, Byte1=LSB 0.1 Kmh/bit 100 302 63
DrAxSpeed word Byte2=MSB, Byte3=LSB 0.1 Kmh/bit 100 302 77
Slip word Byte4=MSB, Byte5=LSB 2nd complement 0.1 % / bit 100 302 78
OSASlip word Byte6=MSB, Byte7=LSB 2nd complement 0.25 deg/bit 100 302 457
userdef word Byte0=MSB, Byte1=LSB 100 303
userdef word Byte2=MSB, Byte3=LSB 100 303
userdef word Byte4=MSB, Byte5=LSB 100 303
userdef word Byte6=MSB, Byte7=LSB 100 303
TEROGBase word Byte0=MSB, Byte1=LSB 1us/bit 50 304 182
TEROG word Byte2=MSB, Byte3=LSB 1us/bit 50 304 181
SABase word Byte4=MSB, Byte5=LSB 2nd complement 0.25 deg/bit 50 304 412
SA word Byte6=MSB, Byte7=LSB 2nd complement 0.25 deg/bit 50 304 418
NTK1 byte Byte0 0bit=0.00 ..256bit=2.00 50 305 36
NTK2 byte Byte1 0bit=0.00 ..256bit=2.00 50 305 37
KFuelLearn word Byte2=MSB, Byte3=LSB 50 305 213
CLC1 word Byte4=MSB, Byte5=LSB 2nd complement 0.05 % / bit 50 305 253
CLC2 word Byte6=MSB, Byte7=LSB 2nd complement 0.05 % / bit 50 305 254
GEAR byte Byte0 0=Neutral, 1..6=Gears, 8=No Gear 50 306 550
spare byte Byte1 50 306
GearShiftTimeRemained word Byte2=MSB, Byte3=LSB 50 306 553
Poil word Byte4=MSB, Byte5=LSB 1 mbar/bit 50 306 55
Pfuel word Byte6=MSB, Byte7=LSB 1 mbar/bit 50 306 56
Baro word Byte0=MSB, Byte1=LSB 1 mbar/bit 50 307 41
LNR3I word Byte2=MSB, Byte3=LSB AD values, 10bit 50 307 18
LNR4I word Byte4=MSB, Byte5=LSB AD values, 10bit 50 307 21
userdef word Byte6=MSB, Byte7=LSB 50 307
VbattDir word Byte0=MSB, Byte1=LSB 0=0 Volts, 1024=18 Volts 25 308 3
VbattKey word Byte2=MSB, Byte3=LSB 0=0 Volts, 1024=18 Volts 25 308 24
Distance word Byte4=MSB, Byte5=LSB 1 m/bit 25 308 560
spare word Byte6=MSB, Byte7=LSB 25 308
LNR1I word Byte0=MSB, Byte1=LSB AD values, 10bit 25 309 9
LNR2I word Byte2=MSB, Byte3=LSB AD values, 10bit 25 309 10
LNR5I word Byte4=MSB, Byte5=LSB AD values, 10bit 25 309 22
LNR6I word Byte6=MSB, Byte7=LSB AD values, 10bit 25 309 23
userdef word Byte0=MSB, Byte1=LSB 25 30A
userdef word Byte2=MSB, Byte3=LSB 25 30A
userdef word Byte4=MSB, Byte5=LSB 25 30A
userdef word Byte6=MSB, Byte7=LSB 25 30A
TH2O byte Byte0 0bit=-10 ..256bit=+150 12,5 30B 44
TOIL byte Byte1 0bit=-10 ..256bit=+150 12,5 30B 47
TFUEL byte Byte2 0bit=-10 ..256bit=+150 12,5 30B 58
Tair byte Byte3 0bit=-10 ..256bit=+150 12,5 30B 46
Tair2 byte Byte4 0bit=-10 ..256bit=+150 12,5 30B 52
SelEpromTable byte Byte5 1, 2, 3. 12,5 30B 150
KFuelCal byte Byte6 0bit=0..256bit=2.00 12,5 30B 233
spare byte Byte7 12,5 30B
FuelUsed word Byte0=MSB, Byte1=LSB 12,5 30C 190
FuelLeft word Byte2=MSB, Byte3=LSB 12,5 30C 189
LapTime100 word Byte4=MSB, Byte5=LSB 12,5 30C
CrankCount word Byte6=MSB, Byte7=LSB 12,5 30C 188
MalfQs byte Byte0 12,5 30D 473
SmotBCam byte Byte1 12,5 30D 474
SmotCount byte Byte2 12,5 30D 475
spare byte Byte3 12,5 30D
spare word Byte4=MSB, Byte5=LSB 12,5 30D
spare word Byte6=MSB, Byte7=LSB 12,5 30D
userdef word Byte0=MSB, Byte1=LSB 12,5 30E
userdef word Byte2=MSB, Byte3=LSB 12,5 30E
userdef word Byte4=MSB, Byte5=LSB 12,5 30E
userdef word Byte6=MSB, Byte7=LSB 12,5 30E

lqm
Posts: 3
Joined: Thu Feb 25, 2010 1:20 pm
Contact:

Postby lqm » Sun Feb 28, 2010 6:54 pm

is there anyone who can help me.
I am under a time pressure, I will run on Tuesday
and everything is ready except the dash 2

Support

Postby Support » Mon Mar 01, 2010 3:21 pm

Could you email the .ccf file you have been using to mhill(at)race-technology.com, we can then check it over and give you some feedback.


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 6 guests