Can someone send me a dash.hex file for dash 2

[David Reid]

Right I connected my dash 2 as described in the manual. Dash 2 to Emerald K3

1st Power up with the dash 2 not connected to the emerald. Result OK screen as expected buttons work.

2nd Power up connect to emerald kit via emerald com port, result nothing reading, so assume it needs to connect to the other port (as neither the emerald or RT instructions say which port to use). Result dash 2 locked as per the picture after a failed reflash on RT site.

Having searched on here I now understand that I need to connect to the Emerald ECU via the Emerald lead into the coms port (it would be nice to add that to the instructions!).

But I also now need to unlock my Dash2, so can someone send me the dash.hex file I need

I would like to do this tomorrow and RT are closed for the weekend.

I would really appreciate help in getting this fixed

I am not sure if you will be able to PM me as I cant get it to work, so please email to davidreid69@hotmail.co.uk

David

[GMS Racing]

David,

Did you resolve the problem?

This is where you can get the latest Dash.hex file from.

http://www.race-technology.com/product_ ... 30545.html

Just be certain that you know what to do as you may completely lock out the unit and it will then need to be returned to RT.