Monitor only loads one gauge per category!
Monitor only loads one gauge per category!
I have installed the latest software and when running Monitor only one gauge per category is loaded.
The library that we use for controls is made by "global majic" and the help file can be downloaded from here:
http://www.globalmajic.com/mc_images/ca ... _helps.zip
As you will see you can set these up to do almost anything! The problem is that they are almost "too flexible" and can be a pain to configure.
To address this we are going to include more examples of pre-configured dials etc.
In the meantime if you just want a steering wheel then load up the example monitor file. Right click on the steering wheel and click "define as custom...".
Thanks
Support
http://www.globalmajic.com/mc_images/ca ... _helps.zip
As you will see you can set these up to do almost anything! The problem is that they are almost "too flexible" and can be a pain to configure.
To address this we are going to include more examples of pre-configured dials etc.
In the meantime if you just want a steering wheel then load up the example monitor file. Right click on the steering wheel and click "define as custom...".
Thanks
Support
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 5 guests