Monitor only loads one gauge per category!

KBL
Posts: 40
Joined: Sun Jan 27, 2008 1:03 am
Location: Vellinge, Sweden

Monitor only loads one gauge per category!

Postby KBL » Fri Jul 04, 2008 9:07 am

I have installed the latest software and when running Monitor only one gauge per category is loaded.

Support

Postby Support » Mon Jul 07, 2008 7:32 am

Although it might look as if there is only one type of gauge, you can customise it in many ways to make it look like a whole variety of different gauges by modifying the pointer type, scales, annulars, fonts, colours, etc. to make as many different types as you like.

Martin

KBL
Posts: 40
Joined: Sun Jan 27, 2008 1:03 am
Location: Vellinge, Sweden

Postby KBL » Thu Jul 10, 2008 7:43 am

Okay, how do I configure to get the steering wheel like gauge like the one displyed in previous releases?

Support

Postby Support » Thu Jul 10, 2008 9:14 am

The library that we use for controls is made by "global majic" and the help file can be downloaded from here:

http://www.globalmajic.com/mc_images/ca ... _helps.zip

As you will see you can set these up to do almost anything! The problem is that they are almost "too flexible" and can be a pain to configure.

To address this we are going to include more examples of pre-configured dials etc.

In the meantime if you just want a steering wheel then load up the example monitor file. Right click on the steering wheel and click "define as custom...".

Thanks

Support

KBL
Posts: 40
Joined: Sun Jan 27, 2008 1:03 am
Location: Vellinge, Sweden

Postby KBL » Thu Jul 10, 2008 12:45 pm

Why did you remove all the pre-configured gauges?


Return to “General software support”

Who is online

Users browsing this forum: Google [Bot] and 9 guests