DL2 20 hz software

juancas
Posts: 8
Joined: Wed Aug 01, 2007 11:18 am

DL2 20 hz software

Postby juancas » Wed Nov 14, 2007 3:46 pm

juancas wrote:Hi,

I have a 20 hz DL2. When I installed the V.6 of the Analysis Software I had to change the code.bin file just to use the post-processed 20Hz-data in the GPS options. Now, with V.7 I don´t have this option and I don´t know if I have to change the codes file or not. How can I know if the software is using the 20 hz capability? Do I have to change the processserialdata.dll to get the data from the IMU? Can anyone help me?

thank you

RTUSA
Site Admin
Posts: 457
Joined: Fri Feb 24, 2006 7:34 pm
Location: Richmond, VA, USA

Postby RTUSA » Thu Nov 15, 2007 9:47 pm

Re 20Hz: The new software should already know that your serial # is 20Hz enabled. To test this, set Data > Analysis Options > GPS Options to "Use raw GPS data" and "Use post processed 20Hz data". Process some data, it will object if not enabled.

Re the IMU, I see variables available under Data > Variable Manager > Serial Variables that look like the IMU channels - try processing some IMU data with those enabled and see if that is the case.
Al Seim
Race Technology USA


Return to “General software support”

Who is online

Users browsing this forum: No registered users and 6 guests