Postprocess and 20Hz option

justpete
Posts: 6
Joined: Wed Apr 02, 2014 9:31 pm

Postprocess and 20Hz option

Postby justpete » Tue Apr 22, 2014 1:49 am

I have the 20Hz option in a DL1 Mk3 but selecting any option under the GPS tab of the Analysis Option but the first one returns an error msg:

This operation requires the purchase of the high accuracy 20hz gps add-on. To purchase licence keys, please contact www.Race-technology.Com.

And then the GPS tab is back to having only the first option selected again.

What exactly is the issue keeping the analysis software from using PPP?

Reading the config from the DL1 shows the extended GPS is enabled, the DL! flash storage is configured to have 20Hz GPS enabled as well as gradient, etc. enabled for storage.

A bit confused here, any help would be greatly appreciated. TIA

Support
Posts: 323
Joined: Mon Nov 21, 2005 4:09 pm

Support

Postby Support » Tue Apr 22, 2014 8:40 am

The GPS 20Hz license requires 2 licenses for the DL1 MK3. One license to enable the DL1 to log the data and another to enable the PC to decode it.

It only requires 1 purchase. Please email sales@race-tech... with your order for the license and we will resend the licenses.

Kind regards,
Support (K)
______________________________
Posted by Race Technology Support


Return to “GPS-specific questions”

Who is online

Users browsing this forum: No registered users and 1 guest