Configuring brake pressure sensor
Configuring brake pressure sensor
I'm currently working through the DL1 Club config and have the RT supplied brake pressure sensor wired into An4 but I'm unsure what to select in the software. I can't find a brake pressure option?
Re: Configuring brake pressure sensor
Hello Chris,
If you map your input to a pressure channel you will then be presented with a choice of RT-supplied pressure sensors to choose from. In your case select the Bosch brake pressure sensor.
The principle is described here:
https://www.race-technology.com/wiki/in ... ogueInputs
This shows temperature but the method is the same for pressure channels.
Regards,
Lorne Winborn
If you map your input to a pressure channel you will then be presented with a choice of RT-supplied pressure sensors to choose from. In your case select the Bosch brake pressure sensor.
The principle is described here:
https://www.race-technology.com/wiki/in ... ogueInputs
This shows temperature but the method is the same for pressure channels.
Regards,
Lorne Winborn
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “Sensor-related questions”
Who is online
Users browsing this forum: No registered users and 4 guests