wheel speed sensor...led flashes bt no speed
Posted: Tue Jun 03, 2014 5:21 pm
Hello,
I have the RT threaded sensor on the drive shaft all set up and when I rotate the wheel the LED goes out when the metal passes the sensor so its reading a pulse right?
But there is no speed reading on the DASH2
the tires are 205/50/15 so my reckoning the circumference is 1840.97mm so the calculation should be 1609/1.84097 =873.995 so I inputted 874 pulses per mile Right ?
what am I doing wring?
Also I have a RT oil temp sensor, is this plug and play or do I need any resistors (got the RT supplied wire at the same time)
last think my oil pressur is reading at around 60-80 PSI is that normal?? Its a 2ltr zetec blacktop.
thank you in advance for the advice etc.
I have the RT threaded sensor on the drive shaft all set up and when I rotate the wheel the LED goes out when the metal passes the sensor so its reading a pulse right?
But there is no speed reading on the DASH2
the tires are 205/50/15 so my reckoning the circumference is 1840.97mm so the calculation should be 1609/1.84097 =873.995 so I inputted 874 pulses per mile Right ?
what am I doing wring?
Also I have a RT oil temp sensor, is this plug and play or do I need any resistors (got the RT supplied wire at the same time)
last think my oil pressur is reading at around 60-80 PSI is that normal?? Its a 2ltr zetec blacktop.
thank you in advance for the advice etc.