Im about to install a sequential box and want to wire up the gear indicator display on my dash 2.
im using a penny and giles hall effect rotary position sensor which has a feed, ground and wiper connection.
the dash 2 manual says on connector 1 use pin 9 (input 1) and pin 6 ground. how would this work with the position sensor i have as the wiper output is works from the live connection
wiring gear position sensor for dash 2
Support
Hello,
Which model of sensor do you have?>>> http://www.pennyandgiles.com/getattachm ... e_oct11(EN)
The connections for this one for example would be
Yellow - Connector 1 pin 9
Red - Connector 2 pin 9
Black - Connect 1 or 2 pin 6
Kind regards,
Support (K)
Which model of sensor do you have?>>> http://www.pennyandgiles.com/getattachm ... e_oct11(EN)
The connections for this one for example would be
Yellow - Connector 1 pin 9
Red - Connector 2 pin 9
Black - Connect 1 or 2 pin 6
Kind regards,
Support (K)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “Sensor-related questions”
Who is online
Users browsing this forum: No registered users and 18 guests