Page 1 of 1

Connecting multiple sensors that need +5 ref and GND?

Posted: Sun Apr 08, 2012 5:53 pm
by SPiFF
In this case 2 R-T temp sensors and an oil pressure sensor. Do they connect in parallel to the DL1?

Posted: Sun Apr 08, 2012 6:50 pm
by Rob Stevens
You just split the 5v and earth as many times as you need it, simples

Posted: Mon Apr 09, 2012 11:29 am
by osborni
I'd add up the current draw of the sensors to ensure they do not exceed the supply ability of the dl1.