Hi all,
I have a dash2 with the speed sensor supplied from RT, speedo is accurate up to say 90mph then just goes to zero after that until I slow down again, I'm using one pick up point.
Please help.
Nino
Speed sensor
Check the clearance between the sensor and the bolt head. You may also need to get a bigger target.
Basically what happens is the target passes the sensor faster than the sensor is able to read it. It appears and is gone before the sensor can change states.
I ran into this same issue before. The clearance is critical as is the size of the target.
Basically what happens is the target passes the sensor faster than the sensor is able to read it. It appears and is gone before the sensor can change states.
I ran into this same issue before. The clearance is critical as is the size of the target.
BMW 2000 M Coupe
-
- Posts: 36
- Joined: Sun Oct 31, 2010 9:36 am
Return to “Sensor-related questions”
Who is online
Users browsing this forum: No registered users and 39 guests