Hallo
ich versuch grad meine emu an das dash2pro anzuschließen.
leider steht in der ecu liste mein ecumaster emu nicht drin.
kann mir da einer weiter helfen?
Dash2Pro an Ecumaster Emu
Re: Dash2Pro an Ecumaster Emu
Hello
I'm trying to connect the dash2pro to my ecumaster emu. but unfortunately this does not work.
I find my ecu not in the list of the RaceTechnology software v8.5
I'm trying to connect the dash2pro to my ecumaster emu. but unfortunately this does not work.
I find my ecu not in the list of the RaceTechnology software v8.5
-
- Posts: 74
- Joined: Mon Aug 17, 2015 9:36 am
Re: Dash2Pro an Ecumaster Emu
Dear Sir / Madam,
Which version of the ECUMASTER EMU do you have i.e. 'Black' version with CAN or a serial ECU?
Best regards,
Support(D)
Which version of the ECUMASTER EMU do you have i.e. 'Black' version with CAN or a serial ECU?
Best regards,
Support(D)
Re: Dash2Pro an Ecumaster Emu
I have serial normal emu . No Black
Re: Dash2Pro an Ecumaster Emu
Hi There,
The ECU master EMU is able to output the Race Technology RS232 data protocol, therefore there is no need to select the ECU from the ECU interface drop down list. Please set this to "Disabled".
Please ensure that you have made the connections required by the ECU as per the below link and also that the Race Technology data protocol has been selected in the ECU mapping software.
http://www.race-technology.com/wiki/ind ... EREMUV1-23
The full list of channels available from this ECU is also available in the above link for your reference.
Kind Regards,
RT Support (SK)
The ECU master EMU is able to output the Race Technology RS232 data protocol, therefore there is no need to select the ECU from the ECU interface drop down list. Please set this to "Disabled".
Please ensure that you have made the connections required by the ECU as per the below link and also that the Race Technology data protocol has been selected in the ECU mapping software.
http://www.race-technology.com/wiki/ind ... EREMUV1-23
The full list of channels available from this ECU is also available in the above link for your reference.
Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Re: Dash2Pro an Ecumaster Emu
Hello
For this option did i need the ECU-licenses?
I have bought a Dash2 pro but i think it was a old unit where all the offered stuff has to buy extra
Where can i buy the liences?
Regards Bruce
For this option did i need the ECU-licenses?
I have bought a Dash2 pro but i think it was a old unit where all the offered stuff has to buy extra
Where can i buy the liences?
Regards Bruce
Re: Dash2Pro an Ecumaster Emu
Hi Bruce
For the ECU Master EMU, no licence is required - this can be set up as described above.
For the 'Black' edition, the CAN Receive option is required - this can be bought from our website here:
https://www.race-technology.com/gb/raci ... /dash2-pro
(Please see 'additional add-ons' at the bottom of the page)
You will need to specify the make and model of the ECU in the 'Special Instructions' at the checkout stage.
I hope this helps.
Best regards,
Adele
For the ECU Master EMU, no licence is required - this can be set up as described above.
For the 'Black' edition, the CAN Receive option is required - this can be bought from our website here:
https://www.race-technology.com/gb/raci ... /dash2-pro
(Please see 'additional add-ons' at the bottom of the page)
You will need to specify the make and model of the ECU in the 'Special Instructions' at the checkout stage.
I hope this helps.
Best regards,
Adele
Re: Dash2Pro an Ecumaster Emu
HI,
with this Post i became my dash working with my EMU Classic. Thank you.
But...
I can not get the Oil Pressure readout, which is one of the most important Datas.
Any tipps for me.
Anything else works, only Oil Pressure not.
In EMU Software i have the data.
Thank you,
Robert
with this Post i became my dash working with my EMU Classic. Thank you.
But...
I can not get the Oil Pressure readout, which is one of the most important Datas.
Any tipps for me.
Anything else works, only Oil Pressure not.
In EMU Software i have the data.
Thank you,
Robert
Re: Dash2Pro an Ecumaster Emu
Hello Robert
Please contact support @ race-technology dot com with details of the issue and one of our technicians will be able to advise you.
Best regards
Support (AH)
Please contact support @ race-technology dot com with details of the issue and one of our technicians will be able to advise you.
Best regards
Support (AH)
Re: Dash2Pro an Ecumaster Emu
OK thank you,
email is sent!
Robert
email is sent!
Robert
Return to “Installation questions”
Who is online
Users browsing this forum: Google [Bot] and 10 guests