Ecu can Adapter ignijet ducati 2007 dl1 dash2

Dun3
Posts: 2
Joined: Sun Oct 09, 2016 9:43 am

Ecu can Adapter ignijet ducati 2007 dl1 dash2

Postby Dun3 » Fri Feb 24, 2017 11:54 pm

Hello,
How Do i have to Configure the can Adapter to Work with the ecu-dl1

I Do the Configuration with 125bit rate like its in the wiki discription
http://www.race-technology.com/wiki/ind ... IgnijetECU

But IT doesnt Work is the can Adapter broken?

Please help

Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Re: Ecu can Adapter ignijet ducati 2007 dl1 dash2

Postby Support » Mon Feb 27, 2017 1:38 pm

Hi there,

If you would contact me via email, I can supply you with the correct configuration file to try with the Ducati Ignijet ECU before we begin to fault find on the hardware.

Please email me on the below address

sam@race-technology.com

Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support


Return to “Installation questions”

Who is online

Users browsing this forum: Bing [Bot] and 26 guests