Hello,
How Do i have to Configure the can Adapter to Work with the ecu-dl1
I Do the Configuration with 125bit rate like its in the wiki discription
http://www.race-technology.com/wiki/ind ... IgnijetECU
But IT doesnt Work is the can Adapter broken?
Please help
Ecu can Adapter ignijet ducati 2007 dl1 dash2
Re: Ecu can Adapter ignijet ducati 2007 dl1 dash2
Hi there,
If you would contact me via email, I can supply you with the correct configuration file to try with the Ducati Ignijet ECU before we begin to fault find on the hardware.
Please email me on the below address
sam@race-technology.com
Kind Regards,
RT Support (SK)
If you would contact me via email, I can supply you with the correct configuration file to try with the Ducati Ignijet ECU before we begin to fault find on the hardware.
Please email me on the below address
sam@race-technology.com
Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “Installation questions”
Who is online
Users browsing this forum: Google [Bot] and 7 guests