I have a DL1 feeding a Dash 2 to on our race car. We have a .lap file installed but cannot get lap times to show. The Dash lap counter works OK, the logged data is good and records laps etc. fine but nothing on the Dash?? My son occasionally sees "a flash of something" as he crosses the line but that's it.
We have found the instructions on lap timing very confusing, I have set the positions for the timing (left, mid, right) through the menu but which screen should we be on to see the lap times? or does it override the current screen?
Confused!
No Dash 2 Lap times?
-
- Posts: 10
- Joined: Wed Jul 30, 2008 8:02 pm
- Location: Auckland, New Zealand
Yes, it overrides whatever data is currently displayed.
You also need to have the warning time set to something reasonable like 3 seconds. The other trick is to have the sectors start at track out, not at the end of a straight. There is a slight delay in displaying the times and they might be displaying when busy in the middle of a corner.
You can also set up one screen for time into lap to verify that you are getting lap times.
You also need to have the warning time set to something reasonable like 3 seconds. The other trick is to have the sectors start at track out, not at the end of a straight. There is a slight delay in displaying the times and they might be displaying when busy in the middle of a corner.
You can also set up one screen for time into lap to verify that you are getting lap times.
BMW 2000 M Coupe
Return to “Installation questions”
Who is online
Users browsing this forum: No registered users and 13 guests