Water temp erratic
Posted: Tue May 22, 2018 10:29 pm
Hi, had my dash2, video 4 and DL1 for years and its been great but since I reflashed my dash2 to utilise the new software my water temp has been bouncing about all over. When I first turn the dash on it reads correctly, then slowly drops down to 0, then climbs again to the correct temperature and drops back to 0. In the live monitor it is steady at the correct temperature, as it is in the ECU software. I have a CAN converter connected to a DTA S80. All my other temperature and pressure readings are correct and stable.
Other annoyances, can I turn off the Odometer at all now, or use it for something else? I don't need it and it just clutters up the display.
My GPS keeps saying I'm doing 427mph briefly so my odometer thinks I've done nearly 300 miles tonight....
Please can you shed some light on this for me?
Thanks for your help.
Other annoyances, can I turn off the Odometer at all now, or use it for something else? I don't need it and it just clutters up the display.
My GPS keeps saying I'm doing 427mph briefly so my odometer thinks I've done nearly 300 miles tonight....
Please can you shed some light on this for me?
Thanks for your help.