Dash 2 pro flashing
Dash 2 pro flashing
Performed a store before reconfiguring dash. Loaded a reconfigured file now all lights flash and no function. Reloaded previous stored file and still all lights flash and no function. ECU is a Link G4+. any ideas??
Re: Dash 2 pro flashing
Hi There,
It sounds as if you have overwritten your installed configuration with our default, when no sensors are connected to the displays inputs you will see the water temp alarm flash constantly. this will result in all shiftlights flashing red and the backlight flashing also.
I have attached the Link base configuration to this forum post. Please download and unzip this from the folder and apply to your display.
This should give you the basic functionality back to the unit, you will then need to restore your personal parameters.
Kind Regards,
RT Support (SK)
It sounds as if you have overwritten your installed configuration with our default, when no sensors are connected to the displays inputs you will see the water temp alarm flash constantly. this will result in all shiftlights flashing red and the backlight flashing also.
I have attached the Link base configuration to this forum post. Please download and unzip this from the folder and apply to your display.
This should give you the basic functionality back to the unit, you will then need to restore your personal parameters.
Kind Regards,
RT Support (SK)
- Attachments
-
- DASH2 PRO - Link G4+ CMG.zip
- (136.65 KiB) Downloaded 434 times
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Re: Dash 2 pro flashing
Yep, that sorted it. Thankyou.
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 21 guests