Dash 2 pro flashing

Debenz108
Posts: 3
Joined: Sun Oct 22, 2017 8:45 pm

Dash 2 pro flashing

Postby Debenz108 » Mon Oct 23, 2017 9:49 pm

Performed a store before reconfiguring dash. Loaded a reconfigured file now all lights flash and no function. Reloaded previous stored file and still all lights flash and no function. ECU is a Link G4+. any ideas??

Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Re: Dash 2 pro flashing

Postby Support » Tue Oct 24, 2017 9:19 am

Hi There,

It sounds as if you have overwritten your installed configuration with our default, when no sensors are connected to the displays inputs you will see the water temp alarm flash constantly. this will result in all shiftlights flashing red and the backlight flashing also.

I have attached the Link base configuration to this forum post. Please download and unzip this from the folder and apply to your display.

This should give you the basic functionality back to the unit, you will then need to restore your personal parameters.

Kind Regards,
RT Support (SK)
Attachments
DASH2 PRO - Link G4+ CMG.zip
(136.65 KiB) Downloaded 410 times
______________________________
Posted by Race Technology Support

Debenz108
Posts: 3
Joined: Sun Oct 22, 2017 8:45 pm

Re: Dash 2 pro flashing

Postby Debenz108 » Wed Oct 25, 2017 11:07 pm

Yep, that sorted it. Thankyou.


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 36 guests