Hi,
We have a problem with Dash2Pro. When I enable CAN input, I get warning (x CAN channels configured but only licensed for 0) when sending configuration to Dash.
I have bought CAN15 (option 15) and Dash options I can see it's enabled.
I tried to reflash the dash (I have version 4.0.64, maybe there is newer available?).
I tried to upload factory default and just enabled one CAN input. I still get the licence warning.
Here are the print screens:
https://drive.google.com/open?id=0B3-C5So_nApNUFROdU9QMGRsc28
ECU: Gems 7.5
Dash: Dash2Pro firmware 4.0.64
Please help!
BR,
Indrek
CAN licence problems DASH2Pro
-
- Posts: 74
- Joined: Mon Aug 17, 2015 9:36 am
Re: CAN licence problems DASH2Pro
Hello,
You have nothing to worry about; the license has been applied successfully.
This is a common misconception, the DASH2PRO doesn't just have one configuration, it has up to nine different configurations. The idea behind this is that you could have a different configuration for practice, qualifying and racing if you so wanted and different configurations for different drivers.
We are looking to remove this feature in the future as it has had little to no use in the field.
Best regards,
Support(D)
You have nothing to worry about; the license has been applied successfully.
This is a common misconception, the DASH2PRO doesn't just have one configuration, it has up to nine different configurations. The idea behind this is that you could have a different configuration for practice, qualifying and racing if you so wanted and different configurations for different drivers.
We are looking to remove this feature in the future as it has had little to no use in the field.
Best regards,
Support(D)
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 32 guests