CAN licence problems DASH2Pro

valdz
Posts: 1
Joined: Fri Jul 07, 2017 7:23 pm

CAN licence problems DASH2Pro

Postby valdz » Mon Jul 10, 2017 10:45 am

Hi,

We have a problem with Dash2Pro. When I enable CAN input, I get warning (x CAN channels configured but only licensed for 0) when sending configuration to Dash.

I have bought CAN15 (option 15) and Dash options I can see it's enabled.
I tried to reflash the dash (I have version 4.0.64, maybe there is newer available?).
I tried to upload factory default and just enabled one CAN input. I still get the licence warning.

Here are the print screens:
https://drive.google.com/open?id=0B3-C5So_nApNUFROdU9QMGRsc28

ECU: Gems 7.5
Dash: Dash2Pro firmware 4.0.64

Please help!

BR,
Indrek

Support (D)
Posts: 74
Joined: Mon Aug 17, 2015 9:36 am

Re: CAN licence problems DASH2Pro

Postby Support (D) » Tue Jul 11, 2017 8:42 am

Hello,

You have nothing to worry about; the license has been applied successfully.

This is a common misconception, the DASH2PRO doesn't just have one configuration, it has up to nine different configurations. The idea behind this is that you could have a different configuration for practice, qualifying and racing if you so wanted and different configurations for different drivers.

We are looking to remove this feature in the future as it has had little to no use in the field.

Best regards,
Support(D)


Return to “General support questions”

Who is online

Users browsing this forum: Google [Bot] and 33 guests