Hi there,
I am having a bit of an issue that I thought the community might be able to help with. I am running a DL1 Club connected to a Dash3.
I collect quite a lot of data, unfortunately all the files are just named RUN00001 etc, once you have a few of them it is very difficult to determine which file links up with each drive. I've been told that the DL1 gets its time/date data from the GPS Module and so therefore a GPS lock is needed before a file can be named. I really would like logging to be automatic such that nothing is missed by accident, I have tried the following combinations:
Manual logging via the button, after the unit tells me it has a GPS lock = no date stamp on files
Automatic logging - this feature just doesn't seem to work, any of the selected options just result in logging starting automatically as soon as the unit has power. The one I would particuarly like to use is - start logging once a GPS lock is achieved but this doesn't seem to work.
Any thoughts?
Thanks,
Mike
Automatic logging and Datestamp on files
Re: Automatic logging and Datestamp on files
Hi there,
Please ensure you have the latest firmware installed on your DL1 Club. From January 2016 we had an issue with DL1 Clubs not recognising the correct time and date from GPS when running an old version of firmware. Updating to the latest version will fix this.
Please download and install the latest version of software from the below link;
http://www.race-technology.com/upload/p ... uncher.exe
Update the firmware on the DL1 by going to File > Reflash DL1 firmware.
Kind Regards,
RT Support (SK)
Please ensure you have the latest firmware installed on your DL1 Club. From January 2016 we had an issue with DL1 Clubs not recognising the correct time and date from GPS when running an old version of firmware. Updating to the latest version will fix this.
Please download and install the latest version of software from the below link;
http://www.race-technology.com/upload/p ... uncher.exe
Update the firmware on the DL1 by going to File > Reflash DL1 firmware.
Kind Regards,
RT Support (SK)
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
-
- Posts: 2
- Joined: Wed May 17, 2017 10:11 am
Re: Automatic logging and Datestamp on files
Thanks very much, this solved the issue.
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 55 guests