No proper data/time of logged files.

jeffnickel
Posts: 8
Joined: Fri Nov 06, 2015 6:01 pm
Location: Vancouver Canada

No proper data/time of logged files.

Postby jeffnickel » Fri Mar 04, 2016 11:15 pm

I am logging accelerometer and analog data on a bench test rig I built and not interested in GPS data. The logged .RUN files are saved to the SD card but the data/time stamp on the files is some old default values. Am I correct to assume that the data/time stamp is taken from the GPS data? Or can I set the date/time in the firmware?

Thanks.

stephen hooker
Posts: 33
Joined: Thu Oct 26, 2006 9:18 pm
Location: Sydney, Australia
Contact:

Postby stephen hooker » Sat Mar 05, 2016 7:38 am

Date & time stamps come from GPS. Hook up an antenna and all will be good. I have a DL1 set up to log stress & strain in a workshop, and have a GPS antenna permanently on the roof.
Stephen Hooker
Sydney, Australia


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 35 guests