Dash2 calibration

Post Reply
markk
Posts: 10
Joined: Sat Feb 22, 2014 4:53 pm

Dash2 calibration

Postby markk » Mon Feb 24, 2014 10:34 am

123
Last edited by markk on Wed Aug 13, 2014 9:45 pm, edited 1 time in total.
Top
Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Postby Support » Wed Feb 26, 2014 12:28 pm

It might sound obvious, but are the channels of data you want to display definitely being sent to the DASH2? You can check this by connecting the serial port which usually sends data to your DASH2 to a computer and looking at the data on the 'lite monitor' software.

Martin
______________________________
Posted by Race Technology Support
Top
markk
Posts: 10
Joined: Sat Feb 22, 2014 4:53 pm

Postby markk » Wed Feb 26, 2014 1:33 pm

no longer req.
Last edited by markk on Wed Aug 13, 2014 9:46 pm, edited 1 time in total.
Top
markk
Posts: 10
Joined: Sat Feb 22, 2014 4:53 pm

Postby markk » Wed Feb 26, 2014 1:49 pm

no longer req.
Last edited by markk on Wed Aug 13, 2014 9:46 pm, edited 2 times in total.
Top
markk
Posts: 10
Joined: Sat Feb 22, 2014 4:53 pm

Postby markk » Wed Feb 26, 2014 2:29 pm

Thanks Martin, easily sorted over the phone !

Regards

Mark
Top
markk
Posts: 10
Joined: Sat Feb 22, 2014 4:53 pm

Postby markk » Wed Aug 06, 2014 9:41 pm

no longer req.
Last edited by markk on Wed Aug 13, 2014 9:46 pm, edited 1 time in total.
Top
markk
Posts: 10
Joined: Sat Feb 22, 2014 4:53 pm

Postby markk » Thu Aug 07, 2014 11:15 am

no longer req.
Last edited by markk on Wed Aug 13, 2014 9:46 pm, edited 1 time in total.
Top
racetec
Site Admin
Posts: 326
Joined: Thu Oct 27, 2005 12:02 pm

Postby racetec » Tue Aug 12, 2014 8:43 am

Hi Mark,

I have forwarded the email you sent us to an engineer directly. I hope this helps.

Best regards,

Debbie.
Top
Post Reply

Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 13 guests