DL1 Mk2 + Dash3 + Analog Inputs

Post Reply
nhpctech
Posts: 6
Joined: Tue Mar 19, 2013 5:41 am

DL1 Mk2 + Dash3 + Analog Inputs

Postby nhpctech » Tue Apr 02, 2013 6:18 pm

We have Autometer Guages for oil press, oil temp, sys voltage, and fuel press. Is there a way to hook them to the analog inputs?

Thank you in advance for your help!
Top
nhpctech
Posts: 6
Joined: Tue Mar 19, 2013 5:41 am

Postby nhpctech » Thu Apr 04, 2013 4:30 pm

Can someone please help?
Top
osborni
Posts: 497
Joined: Fri Dec 07, 2007 9:08 pm
Location: USA, Michigan

Postby osborni » Fri Apr 05, 2013 1:41 pm

Those typically use resistance based sensors. The simple answer is no, you can't. The complicated answer is you will need separate sensors and a read through the knowledge base. It can be done, but it's simpler to procure more RT sensors.
BMW 2000 M Coupe
Top
nhpctech
Posts: 6
Joined: Tue Mar 19, 2013 5:41 am

Thanks

Postby nhpctech » Fri Apr 05, 2013 7:17 pm

Thank you for your response. :) I will look into RT sensors.
Top
jlucas
Posts: 302
Joined: Tue Nov 29, 2005 12:45 am
Location: East Liberty, OH
Contact:
Contact jlucas

Re: DL1 Mk2 + Dash3 + Analog Inputs

Postby jlucas » Mon Apr 08, 2013 11:34 am

nhpctech wrote:We have Autometer Guages for oil press, oil temp, sys voltage, and fuel press. Is there a way to hook them to the analog inputs?

Thank you in advance for your help!


You can if they are from Autometer's full sweep electric series, otherwise they are resistance based as previously mentioned.
Jeremy Lucas
Fast Tech Limited - a Race Technology Dealer
Top
Post Reply

Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 287 guests