This has progressed beyond any possible value.
Feel free to continue your rationalization of this error. I will continue to call it what it is, an error.
-Kyle
Frequency inputs dont output 0 at 0 input
I put two brake pressure sensors from CDS into my race technology system and set them up with a simple formula they provided psi = (x*250)-250).
at rest they read 14psi (which interestingly is 1 ATM).
when I checked them against gauges at pressures like 200, 400, and 800 they were dead on.
They are $265 each.
at rest they read 14psi (which interestingly is 1 ATM).
when I checked them against gauges at pressures like 200, 400, and 800 they were dead on.
They are $265 each.
-
- Posts: 36
- Joined: Sun Oct 31, 2010 9:36 am
Hi,
We are aware of the issue, and it does need a fix - however i would add that the DL1 has function exactly like this for the past 7 years and this is only the 2nd time a customer has raised the point! For the majority of applications it really doesn't cause any problems.
So in summary, we are aware and will look into how it can e improved.
Kind regards,
Support
We are aware of the issue, and it does need a fix - however i would add that the DL1 has function exactly like this for the past 7 years and this is only the 2nd time a customer has raised the point! For the majority of applications it really doesn't cause any problems.
So in summary, we are aware and will look into how it can e improved.
Kind regards,
Support
-
- Posts: 3
- Joined: Thu Apr 14, 2011 7:18 am
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 15 guests